zeroSUPERpads V3

Here are the version3 of the zeropads "zeroSUPERpads"

What have changed V1 vs V2:
- only change was bigger surface for velcro. But thin surface (0.6mm) to easily be cut with scissors.

What have changed V2 vs v3:
- No more screw connectors. Not it is just a push-in dubbel T bar connection.
- some parts are wider like the jumpblock and the brakepad.
- New power pad (upper front) made for speed. Pads with a 45 degree angle and not just a straight wall (the classic is still there).

You need TPU95A. And preferable some black PETG to make the first base layers stiffer. I did not in the photos, and it ANNOYS ME!!!!!
Also IF you have 98A TPU or High speed TPU (stiffer) for the inserts it is better than 95A.
If you use BambuLab printers, there is one setting that MUST be changes. The pads have some designed internal reinforcements that will not be printed if you do not change this setting.
Also, print the first 1mm in Black TPU (or PETG) if you have the possibility. Then chang to whatever c