Zipper slider replacement repair

Easily attaches to a zipper without requiring unsewn ends.   Dimensions   Print Instructions For optimal results, print using PETG material with a standard 0.4 mm nozzle and a layer height of 0.2 mm. To enhance strength and precision, reduce the print speed to approximately 30 mm/s. Assembly 1. Position the bottom part beneath the zipper. 2. Slide the top part over the bottom part, aligning it above the zipper. While holding both parts together, attempt to close the zipper. Having a partially closed zipper will simplify the final assembly process. 3. Once the test fit is successful, apply glue to the connecting areas of the bottom and top parts, as well as the handle. Take care to avoid getting any glue on the zipper itself. 4. Reassemble the parts around the zipper and hold them securely in place. 5. Insert the puller into the handle before positioning the handle on top of the assembly. 6. Firmly hold all components together and allow the glue to dry completely. Original work by MisterJ I modified their model to make it compatible for printing on Anycubic printers.