Zombie 1

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.5mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite GITD Green Transmission Distance: 5.1This print uses 2 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to GITD Green for the rest.