Zombie (4 color)

This is strictly for personal use. The photo attached is the printed model and 👉FRAME👈 UPDATE: A new profile has been added for people without an AMS unit. You will need to manually unload/load your filaments when the printer reaches each pause, then resume printing each time until complete. Here is a cool zombie painting that only requires 4 colors to print. If you have never printed a filament painting by HueForge I think it is important to know there is very little waste compared to other multi color prints you may be used to. The filament will only be purged once per color for the whole project, or in simpler terms, only 4 poops! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 8 PLA PolyLite Yellow Transmission Distance: 10 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #12