Thingiverse
Zombie Bear
door Tigrilacelportocaliu
0
Downloads
3
Likes
0
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Protopasta Dusty Smoke Transmission Distance: 20
PLA PolyTerra Army Red Transmission Distance: 0.3
PLA Overture White Transmission Distance: 4.4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dusty Smoke
At layer #9 (0.8mm) swap to Army Red
At layer #12 (1.04mm) swap to White for the rest.
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Protopasta Dusty Smoke Transmission Distance: 20
PLA PolyTerra Army Red Transmission Distance: 0.3
PLA Overture White Transmission Distance: 4.4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dusty Smoke
At layer #9 (0.8mm) swap to Army Red
At layer #12 (1.04mm) swap to White for the rest.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!