Slicer Discord
zoro hueforge – 3D-Druckmodell von MakerWorld MakerWorld
Hueforge & Lithophane

zoro hueforge

120 Downloads
46 Likes
83 Makes
Zum Modell
for the metal design, at layer 10 don't use white but “eryone 3 color black,blue&purple” can resize the model but don't change Z Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 140x186.79mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.4mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA Hatchbox White Transmission Distance: 10This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Marine Blue At layer #10 (0.88mm) swap to White for the rest.
Kategorie
Hueforge & Lithophane
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Warum?
Print-in-place-Design · 3 Farben
Print-in-place 3 Farben / AMS
Supports 1/3
Zusammenbau 0/3
Einstellungen 3/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Farben
3 (AMS/MMU empfohlen)
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen