Zwift Ride Containers/Storage

A set of side by side containers for the Zwift Ride indoor trainer. I found other designs required print supports due to being rectangular, and were not very stiff once installed to the trainer. This model is easily printed with no support necessary and includes a reinforcing bar to add stiffness to the boxes either side of the trainer mount. Customised the front with a RIDE ON slogan and added some Zwift logos at the rear. Can be mounted forwards or backwards and in front or behind the handle bars. You can scale this length-wise without any issues but scaling it width or height will impact the dovetail slots it uses to mount to the trainer. I printed mine in orange PLA, 2 walls, 3 top and bottom layers, 12% rectilinear infill and added a 5mm brim to aid adhesion to the bed which resulted in no peeling at all. If bed adhesion is a real problem, you can pause the print after a couple of layers and making tape the brim to the bed.