ZX and ZY printer frame test

This part is mainly made to test a printers frame for axes perpendicularity. If your printer is built without checking you can get odd shaped prints. Parts that need dimensional accuracy depend on a correctly built printer.XZXY - main test part.The Z dimension should be within 0.5mm. Ideally it should be within less than half your first layer thickness, to account for some first layer squish.The diagonal dimensions should be within 0.6mm. This is the meat of this test part. Note; On a Cartesian style build if you find ZY issues you should print a test part on each side of the bed to check both sides of the frame (or Z rails on a Z axis bed build).The holes are fairly V1 Engineering specific, 8.2mm for bolt holes, 5.2mm for M5 screw holes, 3.4mm for loose M3 screws, 3mm for M3 screw threaded holes. Just a gauge really.The overhang test should be easy, if not your print temps or print fan is off. These need to work for a V1 Design to print well.Ghosting of the logo of other designs in th