RC Plane STand

Simple but solid stand for rc models. Print settings: All parts except belka.stl:layer height: 0.2 mmtop/bottom layers: 3outline/perimeter shells: 3infill: 20% belka.stllayer height: 0.2 mmtop/bottom layers: 4outline/perimeter shells: 4infill: 50% Supports are needed for parts: pokretlom.stl and pokretlod.stl In addition to the printed parts you will also need:6x M6 carriage bolt 30mm long4x M6 carriage bolt 20mm long10x M6 nut2x 32mm (1 1/4 inch) outer diameter PVC tube 50cm longthin sheet of foam rubber (from old mouse pad)