Thingiverse
K8400 VERTEX Z-axis Stabilizer
by Bo_Ris
32
Downloads
29
Likes
0
Makes
Update 5-Sep-2017 Newer revision of this stabilizer has been released.
After reviewing several z-axis stabilizers published here, I decided to design my own. So far it works very well. Using plain 608 bearing and four M3x12mm screws with M3 self-locking nuts.
To make sure the long piece fits Vertex print bed, rotate it in Repetier around Z-axis for 41-42 degrees.
The purpose of rectangular hole at the top is to fit in my Logitech C525 webcam mount described here http://www.thingiverse
After reviewing several z-axis stabilizers published here, I decided to design my own. So far it works very well. Using plain 608 bearing and four M3x12mm screws with M3 self-locking nuts.
To make sure the long piece fits Vertex print bed, rotate it in Repetier around Z-axis for 41-42 degrees.
The purpose of rectangular hole at the top is to fit in my Logitech C525 webcam mount described here http://www.thingiverse
Sign in to leave a comment
Sign in