Thingiverse
Buoy for RC Sailing (straight)
by kjaw999
58
Downloads
49
Likes
0
Makes
Designed this buoy for RC sailing for instance with the RG65 and Micro Magic class. Designed two parts to avoid the use of a support structure.
The top part must be printed with a fill setting of 3-5% and a wall thickness of around .8mm. This ensures a hollow part. The bottom part can be printed with a fill setting of 40%.
The hole in the bottom parts needs to be filled with led bullets fixed with some wood glue. 15 mins epoxy can be used to glue both parts together.
After gluing use e
The top part must be printed with a fill setting of 3-5% and a wall thickness of around .8mm. This ensures a hollow part. The bottom part can be printed with a fill setting of 40%.
The hole in the bottom parts needs to be filled with led bullets fixed with some wood glue. 15 mins epoxy can be used to glue both parts together.
After gluing use e
Sign in to leave a comment
Sign in