Nema 17 Pancake Bracket

A simple bracket to hold my Nema 17 Pancake motor, which I use for my Belted Extruder V2. for 1.75mm Bowden.

If you use a full sized normal Nema 17, you might want to take a look at my Nema 17 motor mount bracket

It might seem fragile, but the rounded edges makes for a really strong piece of a small bracket :)

BOM:
5x m3 nuts
1x m3 20mm screw to lock the Nema 17 in place.
4x m3 screws with a length to mount to your printer etc.

If your m3 nuts are loose, I suggest you use a drop o