Thingiverse
Detachable Micro Z Probe for E3D V6
by Desert
85
Downloads
51
Likes
1
Makes
This is a very simple to assemble and use z-probe which attaches to E3D V6 style nozzles. It should fit any printer that uses a hotend with an E3D style nozzle.
Required:
* A micro push button
* Superglue
First do a test-fit. The probe should fit snugly over your nozzle. If it's too difficult to get on stop trying, slightly adjust the size in the printer and print a new one. You can bend the hotend's heatbreak if you pull or push too hard in one direction on the heater block. If the part
Required:
* A micro push button
* Superglue
First do a test-fit. The probe should fit snugly over your nozzle. If it's too difficult to get on stop trying, slightly adjust the size in the printer and print a new one. You can bend the hotend's heatbreak if you pull or push too hard in one direction on the heater block. If the part
![Warden Operator Mask [FAST Helmet compatible]](https://wsrv.nl/?url=https%3A%2F%2Fmedia.printables.com%2Fmedia%2Fprints%2F984da254-e392-4097-af3c-58a9d950e483%2Fimages%2F12225885_b5259266-77c4-4292-a7f5-802bad441705_255e28ae-7659-427c-a903-3db7755d88e5%2F20260304_171145.jpg&w=400&h=300&fit=cover&output=webp&q=80)
Sign in to leave a comment
Sign in