Thingiverse
IEC320/C14 Plug Mount for 40mm vslot Extrusion
by thehebs
26
Downloads
18
Likes
0
Makes
This is a mount for an iec320/c14 socket and switch I found on amazon: https://www.amazon.com/gp/product/B00X74BUW8/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
This mounts to 4040 or 2040 v slot extrusion from openbuilds.
1)Cut out the .25mm support layer above the nut traps, and insert the nuts into the traps.
2) Tamp the bottom surface onto a flat surface to seat the nut traps flush.
3) run your wiring through the bottom hole and solder it to the tabs on the back of the connecto
This mounts to 4040 or 2040 v slot extrusion from openbuilds.
1)Cut out the .25mm support layer above the nut traps, and insert the nuts into the traps.
2) Tamp the bottom surface onto a flat surface to seat the nut traps flush.
3) run your wiring through the bottom hole and solder it to the tabs on the back of the connecto
Sign in to leave a comment
Sign in