Thingiverse
1U Audio Interface Case
by galactikhan
4
Downloads
2
Likes
0
Makes
This is a case designed to hold an audio interface, or any device, that fits in one rack unit
(1U). The mounting holes are made for heat-pressed threads so that proper rackmount screws may be used. The main body has a Tounge and Groove joint with a slight flited gap made for adhesive bonding. Any adhesive method may be used as long as it keeps the structural integrity of the print material.
The two files labeled under the left and right back are guards designed for protecting Xlr cables, or any other, from damage due to pushing against a wall or surroundings. The length of these plates can be changed to support bulkier cables if required.
(1U). The mounting holes are made for heat-pressed threads so that proper rackmount screws may be used. The main body has a Tounge and Groove joint with a slight flited gap made for adhesive bonding. Any adhesive method may be used as long as it keeps the structural integrity of the print material.
The two files labeled under the left and right back are guards designed for protecting Xlr cables, or any other, from damage due to pushing against a wall or surroundings. The length of these plates can be changed to support bulkier cables if required.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!