Slicer Discord
小鸟武装直升机(2代)螺旋桨可动 – 3D-Druckmodell von MakerOnline MakerOnline
小鸟武装直升机(2代)螺旋桨可动 – Bild 1 小鸟武装直升机(2代)螺旋桨可动 – Bild 2 小鸟武装直升机(2代)螺旋桨可动 – Bild 3 小鸟武装直升机(2代)螺旋桨可动 – Bild 4 小鸟武装直升机(2代)螺旋桨可动 – Bild 5 小鸟武装直升机(2代)螺旋桨可动 – Bild 6
Miniatures

小鸟武装直升机(2代)螺旋桨可动

188 Downloads
64 Likes
0 Makes
Zum Modell
这个模型是基于我之前设计的一代小鸟迷你直升机改进而来,优化了结构设计,使螺旋桨可以360度转动。模型的武器有2门机炮,2门机枪,2枚导弹。三发涡喷发动机,武力值拉满。 This model is improved based on a generation of bird mini helicopters I designed before, optimized the structural design so that the propeller can rotate 360 ​​degrees. The models' weapons include 2 machine guns, 2 machine guns, and 2 missiles. Three-engine turbojet engine, full force value. 需要的工具(tool): 尖嘴钳Point-nosed pliers 胶水glue  注意事项(Things to note): 因为零件很小,所以收零件的时候请小心,不然容易丢失或掰断; Because the parts are very small, please be careful when collecting the parts, otherwise it will easily be lost or broken; 除了两个螺旋桨,其他部位均需要用胶水固定; Except for the two propellers, all other parts need to be fixed with glue; 打印前请清洁好打印版,做好耗材烘干,可视情况涂点打印胶; Please clean the printing version before printing, dry the consumables, and apply some printing glue as appropriate;
Kategorie
Miniatures
Quelle
MakerOnline
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
Supports nötig
Einteilig Supports nötig
Supports 2/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Kleben
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

虾七八想 veröffentlicht auch auf

58 zusätzliche Modelle auf 2 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen