20x4 Display + Encoder Module

I found myself needing a pendant to hold a 20x4 display and a KY-040 encoder for scrolling through a custom menu. I used a DB-9 connector and DB-9 cable to connect it to the Arduino side. The KY-040 has five pins, and the 20x4 display has four pins, so DB-9 is perfect. To complete this module, you will need:

4 x M3x30mm Flat Head Screws
2 x M3x15mm Flat Head Screws
8 x M3 Nuts
2 x M3x6mm Standoffs
1 x 20x4 Screen Module
1 x KY-040 Encoder Module
1 x DB9 Connector with solder cups
Wires and Dupont connectors.

I included the .step files so you can modify it if needed.