Thingiverse
Diameter Calibration for Holes and Cylinders (2,0-3,9 _ 0,1Steps) (updated)
by educa_thor
83
Downloads
35
Likes
0
Makes
this is basically a small plate with different cylinders ( =outer diameters) and holes ( =inner diameters) from 2,0mm-3,9mm increasing by 0,1mm steps
had lots of trouble in the past with tolerances and now i know why... my printer is off.
i messured the print, did some excel-magic and BOOM:
the maximum differences are from +0,1mm to -0,44mm
(see the graphs: the closer the line is to the blue one, the better)
right now i know HOW MUCH it is off, but not HOW to FIX the issue. (see my pri
had lots of trouble in the past with tolerances and now i know why... my printer is off.
i messured the print, did some excel-magic and BOOM:
the maximum differences are from +0,1mm to -0,44mm
(see the graphs: the closer the line is to the blue one, the better)
right now i know HOW MUCH it is off, but not HOW to FIX the issue. (see my pri
Sign in to leave a comment
Sign in