Thingiverse
"Gunnozzle" 3D printer extrusion fan nozzle (print cooler) for Prusa I3 designs etc and mk8 mk9 etc. extruder . Design has built in scaffold
14
Downloads
11
Likes
0
Makes
This is an air nozzle to direct air onto freshly extruded layer of print . The fan that you will need to get for use with this nozzle is a 40 mm fan.
For the Prusa I3 etc. and MK8 extruders .
This has STL for your own slicing or G.code to use for printing
The Gcode is for those who have the usual .4mm extruder nozzle.& for PLA
One thing , Clearances are tight , so just make sure the extruder nozzle is lower than the bottom of the gunnozzle so as not to bottom out the gunnozzle against
For the Prusa I3 etc. and MK8 extruders .
This has STL for your own slicing or G.code to use for printing
The Gcode is for those who have the usual .4mm extruder nozzle.& for PLA
One thing , Clearances are tight , so just make sure the extruder nozzle is lower than the bottom of the gunnozzle so as not to bottom out the gunnozzle against
Sign in to leave a comment
Sign in