Thingiverse
Cooling fan duct for 60mm fan
by morxw
6
Downloads
4
Likes
0
Makes
Cooling fan duct for my Extruder design: https://www.thingiverse.com/thing:2567851
It uses a 60mm fan to cool the printed parts. It's Design isn't that great since it's so long and hanging quite far away from the X-axes carriage, which makes everything a little wobbly but wasn't a big problem until now, since i use a moderate stepper acceleration and not too fast printer speed settings.
The Fan is mounted with four M4 screws on the fanhousing. The rest is mounted with M3 x 20mm screws, except
It uses a 60mm fan to cool the printed parts. It's Design isn't that great since it's so long and hanging quite far away from the X-axes carriage, which makes everything a little wobbly but wasn't a big problem until now, since i use a moderate stepper acceleration and not too fast printer speed settings.
The Fan is mounted with four M4 screws on the fanhousing. The rest is mounted with M3 x 20mm screws, except
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in