Thingiverse
ANET A8 Rear Bed Level Sensor Holder - Modified
by ikarisan
30
Downloads
21
Likes
0
Makes
This sensor holder has been modified to be used with an 18mm sensor, 4mm mount-screws and 3mm screws to fix the sensor.
The original design is okay, but I needed a mount that makes use of M4 screws to fix the holder. So I used Tinkercad to modify the STL file in the following way:
- Mounting holes are now 4.2mm in diameter
- Mounting plate is now 4.xmm instead of 2.5mm (sensor has same distance to nozzle)
- The sensor is fixed by two 3mm x 12mm screws
UPDATE:
For version "M18 senso
The original design is okay, but I needed a mount that makes use of M4 screws to fix the holder. So I used Tinkercad to modify the STL file in the following way:
- Mounting holes are now 4.2mm in diameter
- Mounting plate is now 4.xmm instead of 2.5mm (sensor has same distance to nozzle)
- The sensor is fixed by two 3mm x 12mm screws
UPDATE:
For version "M18 senso
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in