Thingiverse
BennyModz Nerf Longshot Breech for BrassBreech
by Bennychai
84
Downloads
67
Likes
2
Makes
This design is inspired by fléchette spectre.
I design this as I'm using a 0.6 nozzle diameter, this model is able to print with a 0.4-0.6 nozzle as the walls are thicker. Maybe slightly stronger? This Breech design is able to fit in aluminium plungertube, the back part has the outer diameter of 33.9mm.
Breech is meant to fit in 19/32 brass size. This set up will be much easier to build a brass breech. Unlike back then everyone has to cut the nub and glue on the brass which is a hassle. Y
I design this as I'm using a 0.6 nozzle diameter, this model is able to print with a 0.4-0.6 nozzle as the walls are thicker. Maybe slightly stronger? This Breech design is able to fit in aluminium plungertube, the back part has the outer diameter of 33.9mm.
Breech is meant to fit in 19/32 brass size. This set up will be much easier to build a brass breech. Unlike back then everyone has to cut the nub and glue on the brass which is a hassle. Y
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in