Thingiverse
Dremel/Rotary Tool Shaft Lock Pin
by MarioPato
11
Downloads
10
Likes
0
Makes
My rotary tool shaft lock pin wasn't working anymore so I designed a replacement.
You will need a 2.5mm x 20mm screw, and cut to 15mm or 14mm, according to your needs(12mm are inserted into the piece and it is designed for M3 screws but my printer is not perfect so M2.5 did the trick) and a 3 mm spacer wich will be glued, with epoxy or superglue to the tip after inserting the screw.
You can see it working here: https://youtu.be/LaGFR-mxijI
You will need a 2.5mm x 20mm screw, and cut to 15mm or 14mm, according to your needs(12mm are inserted into the piece and it is designed for M3 screws but my printer is not perfect so M2.5 did the trick) and a 3 mm spacer wich will be glued, with epoxy or superglue to the tip after inserting the screw.
You can see it working here: https://youtu.be/LaGFR-mxijI
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in