X5S Single Z motor

You will need :

-Belt: GT2 belt. 1220mm
-2020 extrusion : 460mm
-2020 Corners to attach the 460mm 2020 extrusion in the midle. I used these: https://www.thingiverse.com/thing:2771055
-M5 20mm to 30mm screws (what ever you have) for the bearings
-Some Tnuts M4 and M4 small screws
-2X 60T GT2 pulleys
-2 X 625 bearings that you mount with M3 screws directly on the motor itself.
-4 X big washers for the 625 bearings to hold the belt in the path
-6 X small washers for the 625 bearings. (2 in between each big washer) and 1 on top for the M3 screw
-Retune your Marlin for 1200steps/mm (or adjust in eeprom)
- re-use the top Z bearing at the bottom. No need for bearing up top
- 2 X 500m 8mm threaded rods

Optional but recommended for regidity:

- Z brace.stl
- Middel 2020 brace.stl
- 2020 brace.stl