Tarantula Y carriage w/ adjustable wheels (No Eccentric Nuts)

This is my creation to remove those dreaded eccentric nuts from the Tarantula Y carriage.
This will bolt up to the stock acrylic bed frame or aftermarket aluminum version.
The holes are aligned in the center of each frame hole and so no filler needed for the eccentric holes.
There is no need for the nylon spacers or the ungodly amount of washers used for spacing purposes.

Parts list:
4: 40mm-45mm x 5mm bolts (only use low profile headed bolts for clearance reasons)
4: 24mm x 5mm bolts