Thingiverse
Wanhao Duplicator i3 Mini improved Fan Shroud
by peter47_a
48
Downloads
23
Likes
0
Makes
#Why?
The stock shroud had issues with overhangs and stringing, this shroud concentrates the airflow towards the tip of the nozzle to improve things. I'm currently using the latest iteration v9 however v5 was also performing nicely on the benchmark and is easier to print. I made sure the design looks as close as possible to the original shroud.
I tested all versions with the "All In One 3D printer test" using PLA at 195C and 0.1313mm layer height. (https://www.thingiverse.com/thing:2975429)
The stock shroud had issues with overhangs and stringing, this shroud concentrates the airflow towards the tip of the nozzle to improve things. I'm currently using the latest iteration v9 however v5 was also performing nicely on the benchmark and is easier to print. I made sure the design looks as close as possible to the original shroud.
I tested all versions with the "All In One 3D printer test" using PLA at 195C and 0.1313mm layer height. (https://www.thingiverse.com/thing:2975429)
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in