Thingiverse
T Nut M4 with Nut Fixation Rotating for Extrusion with 6 mm Gap
by vadymch
41
Downloads
30
Likes
0
Makes
T-nut M4 with nut fixation, rottating for 20x20 or 20x40 V-slot aluminum profile (6 mm gap) compliant with original metal T-nut, but adopted for M4 nut.
Please print in the position you see in photos. My print speed was 120 mm/sec. Was Ok!
It isn't very stable, but if you need this today, you can used it. Print please with small pins below.
In photos you can see how the housing is connected to the nut. It works very well and the arrangement can clear movement in the groove.
Please print in the position you see in photos. My print speed was 120 mm/sec. Was Ok!
It isn't very stable, but if you need this today, you can used it. Print please with small pins below.
In photos you can see how the housing is connected to the nut. It works very well and the arrangement can clear movement in the groove.
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in