D-Bot Bed Horizontal Stabilizer

There was a little Z wobble and i didn't have wheels on the front of the bed. I added a 2040 V-slot piece and drew this up in Fusion 360. it attaches from the front. Easier that the usual IF you have already built it.

You Need:
2040 across the front of the bed
5MM Bolts. I think i used M5x20mm
4x 15mm wheels
2 corner joints
12 M4x10mm with T nuts
8 M4 washers for either side of the wheels
4 M4 nuts to secure the M5 bolts holding the wheels