Bicopter Tilt Mechanism for 13 mm Servo with 10% Dihedral

For use with RCExplorer Bicopter: https://rcexplorer.se/shop/

Servo Holder for use with BMS-385DMAX. (13 mm wide)

If printed from Nylon, "Servo-Holder" should weight about 2 Grams while the "support" mount should weigh about 6 Grams.

Motor Holder can be found here: https://www.thingiverse.com/thing:3099720/files

Main hole is for 9.5 x 9.5 mm Carbon rod with zip-ties used to secure the entire assembly.
Granted, David's shops says these rods are 10 x 10 mm but my measurements show di