Thingiverse
Bowden Coupling Block for Flex Wheel Extruder
by Flex_Wheel
0
Downloads
2
Likes
0
Makes
Block for attaching Bowden tube coupling to the Flex Wheel.
You can either thread with 1/8 inch tap or if don't have the tap you can use your coupling to make the thread - If doing it this way it may help while the piece is sitting on the warm heat bed directly after printing.
Attach the block to the Flex Wheel's body using (2) M3 x 16mm .
Files provided for 1.75 mm or 3 mm filament size Flex Wheel Mods (there is a slight difference).
Mount with the arrow located towards the outside
You can either thread with 1/8 inch tap or if don't have the tap you can use your coupling to make the thread - If doing it this way it may help while the piece is sitting on the warm heat bed directly after printing.
Attach the block to the Flex Wheel's body using (2) M3 x 16mm .
Files provided for 1.75 mm or 3 mm filament size Flex Wheel Mods (there is a slight difference).
Mount with the arrow located towards the outside
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in