Thingiverse
Anycubic 4MAX TEVO Titan carriage
by Saccco
36
Downloads
25
Likes
1
Makes
This is a mount for a TEVO Titan extruder. Main goal was to use the stock parts without loosing any print space (X-Y).
I used a V6 heatsink and heatbreak with the stock heatblock and a V6 nozzle.
Parts can be printed with a layerheight of 0,2-0,25mm.
The parts on the pics were printed in PLA, but PETG is suggested for better heat resistance.
A few screws are needed.
- 2× M3×16mm to fix the main body on the front side
- 2× M3×8mm to fix the main body on the backside
- 4× M3 nut to fi
I used a V6 heatsink and heatbreak with the stock heatblock and a V6 nozzle.
Parts can be printed with a layerheight of 0,2-0,25mm.
The parts on the pics were printed in PLA, but PETG is suggested for better heat resistance.
A few screws are needed.
- 2× M3×16mm to fix the main body on the front side
- 2× M3×8mm to fix the main body on the backside
- 4× M3 nut to fi
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in