Ender 3 LCD Wedge

This wedge permits the LCD display to be tilted at a more upright angle (~26 degress). This is very helpful for those that sit near and somewhat below their printer.
The Aluminum extrusion channel (on the Ender's rigth base) is an 8-rail 40x40mm profile. The wedge pins are 20mm with a 6mm inset on the wedge. The pins should be glued (CA) in place after a test fit.
Hardware replacements for the M5 (8mm length) bold are: 2 x M5 14mm and 2 x M5 24mm (length) screws.