Thingiverse

3D Construction Set

by Doodle_Monkey

227 Downloads

233 Likes

1 Makes

Go to Model

Recently I made a shadowless lighting rig and highlight lamp. I had some LED boards laying around and I'm sure any boards you have lying around will work as well. I bought 1/2" aluminum rod from McMaster Carr it was 1/2" x 1/2" x 36" square tubing. I also used 1/4 20 bolts (3/4" long) and nuts for the hinges. Use the caps to cover the bolt head and the nut to tighten the hing assembly. The mounting base has a #8 clearance hole with a countersink. Check out the photos of my rig!!

aluminum aluminum extrusion connector construction electronics LED lighting parts photogrammetry photography Rig

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Why?

large print

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

3D Construction Set

Similar Models

Add to Collection