easter eggs

Home decorations for Easter (5 eggs without function and 2 as tealight covers with stands). Creality Ender 3 V3 printer and PLA material.4 eggs printed in 50% scale of the STL file, 2 (black) in 65% scale of the STL file. Tealight eggs printed in 100% scale.Tealight egg stand, made of 3 parts (two of them are glued together - the top plate and the leg). The lower flap is closed by turning (it has a hole for the switch and holes for the tealight legs - the last photo shows the type of tealight to which the model was adapted). So it is worth getting a similar one or, based on the STL files, adapt the stand to your tealight. Of course, I recommend using an LED tealight. The eggs themselves are only placed on the stand, so you can freely choose them for the stand, use a different color for the stand and the egg, etc.Settings for brown (Polymaker Polyterra PLA) ones:Layer height: 0.20 Line width: 0.42 Wall lines: 2 Filling: 10-15% Print Speed: 300.00 Infill Speed: 300.00 Outer Wall Speed: 210.00 Inner Wall Speed: 240.00 Top Surface Skin Speed: 210.00 Top/Bottom Speed: 210.00 Cooling: ON Ironing: OFF Supports: OFFFor black ones - generic CR-PLA from the list in Creality Slicer.