Thingiverse
3dpBurner. 3D printed laser cutter/engraver
par villamany
7.1k
Téléchargements
5.6k
Likes
40
Makes
NOTE: The files contained here are for 3dpBurner first version. Check http://www.3dpburner.com for the newer 3dpBurner2.
Official Facebook group: https://www.facebook.com/groups/3dpburner
3dpBurner is an open source laser cutter/engraver.
It is created with the same RepRap concept, using 3D printed parts and some easy to find "vitamins" (not printed hadware).
I tried to do it as cheap as possible, by using cheap electronics
and a "low power" laser (a laser diode).
The X/Y working area is fully customizable and the max working object height is up to 50-60mm.
You can check http://www.3dpburner.com for more details.
NOTE: It is imperative you get the apropiate protection for your eyes and prevent the toxic fumes released by the most of materials. First thing you need to buy prior to powering your laser is a pair of glasses adecuated to your laser wave lengh. The laser spot or laser reflections can hurt your eyes very easily. Avoid to use invisible diodes as
Official Facebook group: https://www.facebook.com/groups/3dpburner
3dpBurner is an open source laser cutter/engraver.
It is created with the same RepRap concept, using 3D printed parts and some easy to find "vitamins" (not printed hadware).
I tried to do it as cheap as possible, by using cheap electronics
and a "low power" laser (a laser diode).
The X/Y working area is fully customizable and the max working object height is up to 50-60mm.
You can check http://www.3dpburner.com for more details.
NOTE: It is imperative you get the apropiate protection for your eyes and prevent the toxic fumes released by the most of materials. First thing you need to buy prior to powering your laser is a pair of glasses adecuated to your laser wave lengh. The laser spot or laser reflections can hurt your eyes very easily. Avoid to use invisible diodes as
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
