Slicer Discord
Trench of death #2 - remasterd original tiles – 3D-Druckmodell von MyMiniFactory MyMiniFactory
Tabletop

Trench of death #2 - remasterd original tiles

0 Downloads
23 Likes
0 Makes
Zum Modell
This set contains 24 remasterd tiles from the 'trench of death #2 - basic original version'. I added a better ground texture and magnet holes to these tiles. This set doesnt recuire the purchase of the complete original set. 1 current tile will recuire an avrage of 90gr / 30meter of PLA. With the standard parameters I used, it takes about 2hours and 45minutes to print, at 300mm/s, 0.2 layer height and with an infill of 4%. So a bit the opposite of the previous fast to print version. This basic set contains 24 tiles: 14 different trench tiles8 battlefield tiles2 bunker tiles Tile size: The original basic tiles, without the sandbags and ground structure attempt are 117,5mm x 117,5mm x 33mm @100%, but I made them 10% bigger (110%) for this project, so they have a size of 132mm x 132mm x 42mm. You can scale them down or up, depending how narrow, wide or high you want them to be. video: https://www.youtube.com/watch?v=d3q8hej4Fv4  
Kategorie
Tabletop
Quelle
MyMiniFactory
Veröffentlicht
Was du zum Drucken brauchst: Fortgeschritten Niedrige Konfidenz
Warum?
aufwändige Nachbearbeitung
Hardware nötig
Supports 1/3
Zusammenbau 2/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Ca. Druckzeit
2 h
Nachbearbeitung
Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

BlackSheepScenery veröffentlicht auch auf

42 zusätzliche Modelle auf 2 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen