Thingiverse
7" LCD Case
por myrlyn
15
Descargas
7
Likes
0
Makes
Enclosure for Alomejor 7 inch LCD TFT Display 1024600 HDMI VGA Monitor Screen Kit for Raspberry Pi 3/2
https://www.amazon.com/gp/product/B07VSG29J2/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
Should be compatible with Adafruit HDMI 4 Pi: 7" Display w/Touchscreen 1024x600- HDMI/VGA/NTSC/PAL
https://www.adafruit.com/product/2395?gclid=Cj0KCQiAwP3yBRCkARIsAABGiPr2Or1cprkWZ27yYXpXtvu1ugCaxPgARkVbYPazKBYN1yRDgTtoKkEaAmbaEALw_wcB
(LCD the same size, and uses same board) - however there is no cabling access for the touchscreen driver, and the fit for this has not been tested.
Assemble with 6 m3 hex-head screws, no nuts - screws thread directly into the plastic on the back part, and self-tap. You will need to use some force, but this worked fine in PETG.
https://www.amazon.com/gp/product/B07VSG29J2/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
Should be compatible with Adafruit HDMI 4 Pi: 7" Display w/Touchscreen 1024x600- HDMI/VGA/NTSC/PAL
https://www.adafruit.com/product/2395?gclid=Cj0KCQiAwP3yBRCkARIsAABGiPr2Or1cprkWZ27yYXpXtvu1ugCaxPgARkVbYPazKBYN1yRDgTtoKkEaAmbaEALw_wcB
(LCD the same size, and uses same board) - however there is no cabling access for the touchscreen driver, and the fit for this has not been tested.
Assemble with 6 m3 hex-head screws, no nuts - screws thread directly into the plastic on the back part, and self-tap. You will need to use some force, but this worked fine in PETG.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!