MyMiniFactory

Physically Simulated Wall Ruin with Rubble and Debris Scatter Presupported

von Slab Terrain

0 Downloads

1 Likes

0 Makes

This wall ruin has been physically simulated using the same CGI techniques VFX artists use in the film industry to achieve an extra level of realism. Test printing was performed using a resin printer (Anycubic Photon Mono m5s) and the presupported model is also included. The process took approximately 6.5 hours with a layer thickness of 0.05 mm and an exposure time of 3 seconds, using Anycubic ABS-like 2.0 resin. I cannot guarantee successful FDM printing, as I have no way to test it.

brick building city concrete D&D debris destroyed DnD rubble Ruin ruined scatter tabletop terrain wall wargame wargaming warhammer wartorn wh40k

Quelle

MyMiniFactory

Veröffentlicht

11.05.2026

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

ABS

Ca. Druckzeit

6.5 h

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Physically Simulated Wall Ruin with Rubble and Debris Scatter Presupported

Ähnliche Modelle

Zur Sammlung hinzufügen