8bitdo Ultimate Controller Stand with Wood Texture

8bitdo Ultimate 2C Controller stand with wood texture8bitdo Ultimate Controller stand with wood texture8bitdo Ultimate Bluetooth controller stand with wood texture8bitdo Ultimate 2 Bluetooth controller stand with wood texture8bitdo Ultimate 2.4Ghz Controller stand with wood texture8bitdo Ultimate 3-mode controller for xbox stand with wood texture8bitdo controller stand with wooden texture applied...........................................................................................................Standard Settings:Creality K1C 0.4mm Nozzle0.2mm Layer height2 walls / wall loops15% infillPrint with Wood CR-PLA for most realistic looking results...........................................................................................................*Disclaimer - Online Cloud Slice software will NOT slice correctly! AVOID!*You will need to download Creality Print, Orca, Bambu Studio, or similar. I use Creality Print..*EASY method: use 3MF file*Using 3MF file should have all non-standard settings configured already!!! =].*HARD method: Use STL files*If you use STL files (requires 2 files), you will need to follow the manual steps (but you will learn something new) -.Non-Standard Settings (only needed if using STL files):Instructions are for Creality Print, Bambu Studio, Orca, and all Orca-based slicers:Step 1)- Import both STL files into Creality Print.- Make sure the main object and the intersection object are completely overlapping one another (in the same exact place) - if not already, you can just select an object ->right click -> "center" (do for both).Step 2)- In the lefthand menu in the "objects" tab, select both objects at the same time -> right click -> and click "Assemble".- Now that you have an assembly, click/select the intersection object ONLY in preparation for Step 3.Step 4)Now that you have the "intersection" object of the assembly selected, look at the righthand side menu.Change the process settings for the intersection Object (settings o