Motor Tilt 10deg ZMR250 for 1806 Motors

Not Tested

Motor Tilt 10deg. for 1806 Motors

hole spacing motor 12mm - 19mm (12mm - 16mm V1.2)
i think you need 5mm long M2 screws
(1,5mm the thing and 3,5mm the motor)

hole spacing leg 19mm
i think on 3mm legs you need 8mm long M3 screws
(3mm leg, 1,5mm the thing and 2,4mm the nut)
(Self-locking nuts are not fit at least in the lower holes as I wanted to keep the part as thin as possible)

First you put nuts into the holes, then you screw the motor and then you can mount it