Motor Tilt 10deg ZMR250 for 2204 Motors

Not Tested

Motor Tilt 10deg. for 2204 Motors

hole spacing motor 15mm - 20mm (for 16mm and 19mm)
i think you need 4-6mm long M3 screws
(2mm the thing and 2-4mm the motor)

hole spacing leg 19mm
i think on 3mm legs you need 8mm long M3 screws
(3mm leg, 2mm the thing and 2,4mm the nut)
(Self-locking nuts are not fit at least in the lower holes as I wanted to keep the part as thin as possible)

First you put nuts into the holes, then you screw the motor and then you can mount it