a zi

Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA PolyLite Temp Purple-Pink-Translucent (Cold) Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PETG JAYO White Transmission Distance: 6 !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue At layer #12 (1.04mm) swap to Temp Purple-Pink-Translucent (Cold) At layer #14 (1.2mm) swap to Red At layer #17 (1.44mm) swap to White for the rest.