MakerWorld
Hueforge & Lithophane
Zum Modell
Adele - 21
7
Downloads
12
Likes
3
Makes
Adele - 21Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 199.69x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #8e9089 PLA BambuLab Basic Gray Transmission Distance: 2 #dde5ed PLA BambuLab Tough Cream White Transmission Distance: 10 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments (IGNORE IF USING AMS)Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Gray At layer #13 (1.12mm) swap to Cream White At layer #15 (1.28mm) swap to Jade White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
