Thingiverse

adjustable Endstop housing right side

por SteffenKonrad

54 Descargas

55 Likes

0 Makes

adjustable endstop housing left side
-----------------------------------------------------------------------------------------------------------

This adjustable endstop housing was designed for a DIY laser cutter project.

The end stop is fixed with two M3 with 15mm screws and nuts in the housing.
The case itself is attached to the item profile with two M4 screws and the matching M4 T-Nuts. With the upper screw, the endstop can now be precisely adjusted

(+) adjustable with the upper M4 screw
(+) very precise and form-fitting
(+) high stability if the infill is increased accordingly

(-) only for mechanical end stops like Makerbot / ReRap

The endstop housing was attached here with two M4 T-Nuts and can be downloaded here:
https://www.thingiverse.com/thing:2770009

check out the matching counterpart so you can put a stop on both sides. ;-)
https://www.thingiverse.com/thing:2785323

Adjustable adjustable endstop endstop fusion 360 groove 8 housing item item light light Mechanical endstop nut t-nut x-endstop x endstop Y-Endstop y endstop Adjustable adjustable endstop endstop fusion 360 groove 8 housing item item light light Mechanical endstop nut t-nut x-endstop x endstop Y-Endstop y endstop

Fuente

Thingiverse

Lo que necesitas para imprimir: Intermedio Baja confianza

Pieza única Tornillería requerida

Soportes 1/3

Ensamblaje 0/3

Ajustes 1/3

Tamaño de cama 0/3

Postproceso 1/3

Impresora

FDM / FFF

Formato de archivo