Props & Terrain STL Download - AECATA11 - Bone Barrowsby Aether Studios

It is fair to say that we cut our teeth on catacombs at Aether Studios. Before even conjuring the idea of our own studio, Colin and Will , were besieged with requests for damned locations on the old FDG Forum.This set is the third of four from our team in May 2025. If four catacomb sets seems like a lot in a month, I promise we didn’t plan it that way. Originally, this was the only set planned, but we found many opportunities to improve the previous sets along the way.Nasos Maloudis sculpted this set, and all the wonderful bits you see in this set are due to his hard work and effort. This set is totally him, and it is a special letter of love to our patrons and tribers.TERRAIN RECOMMENDED PRINT SETTINGS Layer Size​: 0.15mm minimum. 0.1mm recommended.Infill​: 10% for all models recommendedTop/Bottom Layers​: 9 (or 0.9mm if using a different layer size than 0.1mm) Side Shell Count​: 2 (or 0.8mm if using a different nozzle size than 0.4mm)Raft/Brim/Supports​: None