Alien

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 149.95x200mm in size.You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Base Thickness of 0.56mm.The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm.Filaments Used:PLA ******+ Black Transmission Distance: 0.3PLA BambuLab Basic Orange Transmission Distance: 4.8PLA ****** + Yellow Transmission Distance: 4PLA ****** Basic White Transmission Distance: 7This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to OrangeAt layer #15 (1.28mm) swap to YellowAt layer #19 (1.6mm) swap to White for the rest.