Alien Hueforge

Be careful if you use PLA other than that indicated, the TD levels may be different and therefore affect the result. Attention si vous utilisez du PLA autres qu'indiqué, les niveaux de TD peuvent être différent et donc impacter le résultat. Project: Alien.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 199.32x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Black Transmission Distance: 0.6 PLA Francofil Bleu 5002 Transmission Distance: 2 PLA Red Transmission Distance: 4 PLA White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Bleu 5002 At layer #15 (1.28mm) swap to Red At layer #20 (1.68mm) swap to White for the rest. You can increase the size but you must not increase the Z, only the X and Y.