America - Flag - Eagle - Hueforge

*****************************UPDATED I created a V2 of this modelhttps://makerworld.com/en/models/1432910-american-eagle-flag-hueforge-v2#profileId-1490310***************************** I made a bunch of these Hueforge with images generated from A.I.I'm slowly getting around to posting. Hope you enjoy!If you like it please give me a boost :) If you want to scale it up you can but DO NOT TOUCH THE Z HEIGHT! Project: America.hfpPrint at 100% infill with a layer height of 0.12mm with a base layer of 0.2mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.7mm and the Actual Depth is 2.8mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Transmission Distance: 4PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #7 (0.92mm) swap to BlueAt layer #12 (1.52mm) swap