American Flag Eagle Bookmark

Two versions, a red, white, blue and black one and a black and white one. Prints best at .2mm nozzle but .4mm also works For COLORED VERSION use colored filePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Base Thickness of 0.4mmThe Max allowed Thickness is 3.12mm and the Actual Thickness is 2.72mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #5 (0.48mm) swap to Cobalt Blue At layer #8 (0.72mm) swap to Red At layer #12 (1.04mm) swap to Jade White for the rest. For BLACK AND WHITE use grayscale filePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed