AMS 2-Sided Stack Riser for H2D

Inspired by https://makerworld.com/en/models/1281134-t-pose-slim-h2d-dual-ams-riser#profileId-1318835. Their model is way more tested and sophisticated than mine. check them out! Simple Riser allowing 2 ams2's to be stacked side by side on top of the h2d. Uses standard #6 1-5/8" drywall screws because I am lazy and didn't want to buy other screws. Use any material of choice. If using higher chamber temps to print stronger materials, preferably use ABS at a minimum to withstand the heat. Otherwise PLA should be strong enough, but it is untested. All pieces fit on the build plate via the profile given. AMS 1 compatibility untested. PLEASE test fitment by printing only 2 arms + bracket and putting the ams on it. Then scale up or down as needed. EDIT: Version 1.1: -Revised dimensions and clearances. Ams units now sit in the channel correctly -Added a small indent for the ams units to sit in, reducing movement of units when on the riser. -Revised connecting bracket to use 4 screws instead o